Risk 01
Overheating
Most small businesses don't notice a problem until systems slow down or fail. Dust-clogged fans alone can raise rack temperatures by 8-15°C, shortening hardware lifespan and increasing the risk of failure.
Dust, heat, and unmanaged cabling quietly increase the risk of downtime, hardware failure, and audit issues. Most businesses don't see it until something breaks.
We clean, organise, and fix your rack so it runs cooler, safer, and lasts longer with supported documentation.
Overheating, cable chaos, audit risk, all quietly growing in your server cupboard. Most businesses don't realise the cost until something fails.
Unchecked dust and poor cabling shorten hardware lifespan and drive unnecessary e-waste and power use.

Drag to compare · Illustrative images. Your report shows your own rack, before and after.
Risk 01
Most small businesses don't notice a problem until systems slow down or fail. Dust-clogged fans alone can raise rack temperatures by 8-15°C, shortening hardware lifespan and increasing the risk of failure.
Risk 02
Years of ad-hoc cabling create troubleshooting nightmares, extended downtime, and failed IT audits.
Risk 03
A neglected rack is a documentation problem too. Without a maintenance history, there is no evidence your infrastructure meets basic operational standards - which matters during audits, insurance reviews, and due-diligence checks.
Every engagement is structured to reduce failure risk, improve airflow, and return control to your environment. We work inside live infrastructure using processes designed to prevent disruption.
01 / 04
Removal of dust and contaminants that restrict airflow and raise operating temperatures. Performed using ESD-safe equipment rated for live systems.
02 / 04
Restructuring and labelling cabling to create clear, traceable connections throughout the rack.
03 / 04
Identification and correction of airflow inefficiencies including hotspot detection and gap sealing.
04 / 04
Installation and organisation of supporting infrastructure to enable long-term maintainability.
The results of a controlled remediation are measurable and documented. You receive a before-and-after baseline that supports ongoing management and future audit requirements.
Get a Quote
Lower rack temperatures and measurably improved airflow efficiency across active components.
Clearly labelled and structured cabling - faster fault isolation and reduced risk of incorrect changes.
A full baseline condition report for future reference, audit requirements, and ongoing management.
Fewer unplanned events driven by thermal stress, cable error, or undocumented configuration.
We follow controlled processes aligned with how IT systems are actually managed. Every step is coordinated, documented, and reversible.
No cables are disconnected or moved without prior confirmation from your designated IT contact.
Work is planned and executed in alignment with your IT contact or managed service provider.
Every tool and method used is rated for live, energised equipment. Static damage risk is controlled at every stage.
Every job is documented with photographs, temperature readings, and a written report. You have a record of exactly what was done.
This is not general cleaning. This is controlled technical work performed inside live infrastructure.
Results vary by environment. All racks are different.
We fill the gap between generic cleaners who won't touch your gear, and enterprise providers who over-charge for SME server cupboards. We're IT professionals - we understand your infrastructure.
Ideal for businesses with 5-100 staff and one or two racks. Our focus is preserving the hardware you already own, before you're forced into costly replacements.
About Us
We use ESD-safe tools and understand electronics - generic cleaners risk voiding warranties or damaging sensitive hardware.
Enterprise providers charge $2,000+ minimums with weeks of bureaucracy. We offer SME-friendly pricing and typically schedule within a week.
MSPs are often focused on higher-value projects. We specialise in physical infrastructure remediation - and MSPs can engage us directly for their own clients.
$215 per hour, 3-hour minimum booking. Any additional time in 30-minute blocks at $107.50 each. No scope creep - you always know what you're paying.
Rack Stabilisation
$215/hr · 3-hr min · +$107.50/30 min after
Restore stable airflow, reduce dust-related failure risk, and establish a documented baseline. Ideal for single racks with early signs of neglect.
Book ThisFull Rack Remediation
$215/hr · 3-hr min · +$107.50/30 min after
Bring your rack to a controlled, audit-ready state with thermal imaging, cable management rails, and comprehensive reporting. 5% off hardware add-ons.
Book ThisQuarterly Care Plan
Payment in advance · 4 visits/year
4 Rack Stabilisation visits per year. Priority scheduling and 10% off add-ons. $645 per visit (3 hours at $215/hour).
Book ThisMost clients start with a quick quote based on their setup. For more complex environments, we offer a short on-site assessment before any work begins.
All work is planned, controlled, and documented before execution begins. We operate in direct coordination with your IT team and follow a strict change management process. Unexpected findings are photographed and escalated immediately - no work continues without your approval.
Yes. We integrate into existing workflows and align with your processes. We can work directly under the direction of an internal IT manager or a managed service provider. MSPs are welcome to white-label our service for their own clients.
Both. Improved airflow and reduced thermal load directly affect system stability and hardware lifespan. The maintenance work has measurable performance outcomes - not just a cleaner appearance.
Most work is completed with systems live and operational. Any changes that require a planned outage are agreed in advance with your IT contact before the job date.
If your rack has visible dust accumulation, unmanaged or unlabelled cabling, or no maintenance documentation, there is likely measurable risk present. We can assess quickly - contact us with a brief description or photos and we will advise at no cost.
Yes. We use ESD-safe HEPA vacuums and anti-static chemicals rated for live electronics. We coordinate with your IT contact before beginning so no critical system is approached without explicit permission.
A Rack Stabilisation on a single 42U rack typically takes 2-3 hours - usually within the 3-hour minimum booking. A Full Rack Remediation on a heavily cabled rack can take 4-6 hours; time beyond the 3-hour minimum is billed at $107.50 per 30 minutes. We'll give you an accurate time estimate before we start, and we always notify you before additional time is charged.
Yes. Any package can be delivered outside 8am-6pm Monday-Friday at a 25% premium. Weekend and late-night availability requires 48 hours notice.
Our primary service area is Adelaide metropolitan, within 20km of the CBD - travel costs are absorbed into the package price. Outer metro and regional SA is available with a travel surcharge ($50-$120 depending on distance).
Absolutely. Every job includes a written report with before/after photos, temperature readings, and work performed - suitable for IT audits and management review.